Télécharger Imprimer la page

R&G LP0360BK Notice De Montage page 9

Publicité

Les langues disponibles

Les langues disponibles

Page 26 of 26
IMPORTANT :
EN
D'IMMATRICULATION, AVANT LE PERÇAGE, VÉRIFIEZ QUE LA PLAQUE D'IMMATRICULATION
N'OBSTRUE PAS LES CLIGNOTANTS À L'ARRIÈRE DE LA MOTO.
Selon les lois locales, installez le réflecteur fourni (article 12) à un endroit approprié.
IMPORTANT: SI VOUS MONTEZ UNE PLAQUE D'IMMATRICULATION DE GRANDE TAILLE ET LA
PLACEZ BIEN EN BAS SUR LE SUPPORT DE PLAQUE D'IMMATRICULATION, IL Y A UN RISQUE
QUE LA PLAQUE D'IMMATRICULATION FRAPPE LA ROUE ARRIÈRE SOUS UNE CHARGE LOURDE
ET SUR DE GROSSES BOSSES SUR LA ROUTE. IL EST DE VOTRE RESPONSABILITÉ DE VÉRIFIER
CETTE POSSIBILITÉ ET DE PRENDRE DES MESURES POUR ÉVITER. NE PAS VÉRIFIER CELA
POURRAIT ENTRAÎNER DES BLESSURES GRAVES.
Vous pouvez maintenant remettre en place la selle passager.
À ce stade, testez toutes les fonctionnalités d'éclairage, y compris l'éclairage de la plaque
d'immatriculation, avant de rouler.
Voir plus de produits R&G pour votre moto via ce lien :
R&G Racing | All Products for Kawasaki - ZH2 (2020) (rg-racing.com)
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design
changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The
Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than
those in R&G's order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and
suitable for its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and
care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the
warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option
either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or
maintained otherwise than in accordance with R&G's or manufacturer's instructions and good engineering practice or if the defect
arises from accident or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and
personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid
by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer's statutory rights.
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they
were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in
re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and handling fee (25% of the gross value
exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of
discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to
faulty goods.
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
FONCTION
DE
LA
ISSUE 1 14/04/2023 (DM)
R&G RETURNS POLICY (NON-FAULTY GOODS)
Unit 1, Shelley's Lane, Eas t Worldham , Alton, Ham ps hire, GU34 3AQ
TAILLE
ET
DE
CONSUMER NOTICE
R&G
www.rg-racing.com
LP0360BK
L'ORIENTATION
DE
Em ail:
info@rg-racing.com
LA
PLAQUE

Publicité

loading

Ce manuel est également adapté pour:

Lp0360