Geberit MFP 2 Manuel D'utilisation page 30

EN
Maintenance
Maintenance regulations
Interval
Regularly
(before use,
at the start of
the working
day)
After one
year at the
latest, in
accordance
with the
information
on the
service
sticker.
30
Maintenance work
▶ Check the pressing tool
for externally visible
defects and damage that
could affect safety,
particularly leaking
hydraulic oil.
▶ Clean and lubricate the
pressing tool.
▶ Clean pressing
attachments and check
for defects, particularly
for cracks in the
material.
▶ Lubricate the pressing
attachments. → See
user manual for the
pressing attachments in
question.
▶ Have an authorised
repair shop check the
press capacity and the
state of wear.
Cleaning and lubricating the
Geberit pressing tool
ATTENTION
Damage to the device from moisture
▶ Never clean the pressing tool with
water or other liquids.
1
Clean the roller drive, roller drive
guide and retaining pin of the
pressing tool.
2
Use a brush to remove dirt.
CAUTION
Harmful substances
▶ Observe the safety notes of
the lubricant used.
3
Lubricate the roller drive, roller drive
guide and retaining pin with a
lubricant recommended by Geberit.
4
Wipe away excess lubricant using an
absorbent cloth.
54043198644519051 © 12-2023
968.243.00.0(01)