Geberit MFP 2 Manuel D'utilisation page 26

EN
Operation
Inserting Geberit pressing
attachments
Observe the user manuals of the
Geberit pressing attachments. Check
the pressing attachments according
to the safety chapter.
1
Turn the retaining pin by 180° to the
front and remove it.
2
Insert the pressing attachment into
the pressing tool.
26
3
Push the retaining pin in until the
stop position is reached and turn it by
180° to the rear.
Result
✓ The pressing tool is ready for operation.
54043198644519051 © 12-2023
968.243.00.0(01)