Geberit MFP 2 Manuel D'utilisation page 27

Pressing with Geberit
pressing attachments
WARNING
Risk of injury caused by flying
fragments
▶ Wear protective goggles and
a protective helmet.
WARNING
Risk of injury caused by the
use of incorrect pressing
attachments
▶ Only use pressing
attachments that correspond
to the diameter of the
pressfittings to be
processed.
To improve ease of use, the pressing
head of the pressing tool can be
turned to any position up to 180°
before pressing. The pressing head
can only be rotated before the
pressing procedure.
54043198644519051 © 12-2023
968.243.00.0(01)
Prerequisite
– Pipe ends are deburred and clean.
– The pipe section and pressfitting are
fitted together according to the
installation manual of the piping
system.
– The pressing attachment is inserted
correctly.
– The hydraulic valve of the pressing tool
is open and the handle has been
pushed backwards.
1
Fit the pressing attachment to the
pressfitting correctly and do not tilt.
→ See user manual for the pressing
attachments in question.
EN
27