Geberit MFP 2 Manuel D'utilisation page 29

Rectifying malfunctions
Fault
Pressing attachment
cannot be fully opened
and guided over the press-
fitting.
54043198644519051 © 12-2023
968.243.00.0(01)
Cause
Roller drive is too
close to the pressing
attachment.
Action
1. Turn the handle anticlockwise until
the stop position is reached. The
hydraulic valve is opened.
2. Push the handle backwards.
3. Open the pressing attachment
again and place it correctly on the
pressfitting.
4. Push the handle forwards until the
roller drive makes contact with the
pressing attachment.
5. Turn the handle clockwise until the
stop position is reached. The
hydraulic valve is closed.
EN
29