Publicité
Les langues disponibles
Les langues disponibles
No Sound from AUX /
Bluetooth input
Sound is distorted from
AUX Input
Unable to play CD
Static Sound
Desired station not
found
Unit switches off after
15 minutes of inactivity
Radio stations cannot be
tuned in
Specifications
■ General
As part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
Frequency Response
Power Supply
Power Consumptio
Standby Power Consumption
Output Power
Impedance
FM Frequency Range
AM Frequency Range
• Volume is too low
• AUX/Bluetooth source volume is
too low
• Volume is too high
• AUX source volume is too high
• No disc in the tray
• Disc not loaded properly
• Disc is dirty
• Poor reception
• Weak signal
• Station not available in your area
• Auto standby mode in operation
• The antenna is positioned or
connected poorly
n
• Increase the volume
• Increase the output volume of the AUX
source
• Reduce the volume
• Reduce the output volume of the AUX
source
• Insert a compatible disc
• Check the disc loaded correctly
• Clean the disc
• Re-locate the antenna (FM)
• This unit is designed to enter STANDBY
mode automatically after 15 minutes of
inactivity. Press the STANDBY button to
wake up the unit.
• Connect the antenna securely
60Hz - 20KHz
AC 100-240V~ 50/60Hz
140 W
<1W
2 x 50W (RMS)
2 x 4 ohm
87.5-108MHz
520-1710KHz
Publicité
