Sharp XL-B530 Mode D'emploi page 23

● Even when the files are in a supported format (MP3), some may not play or display depending
on the compatibility.
● In some case, reading may be as long as 60 seconds, this is not a malfunction.
● Depending on the amount of data and media speed, it may take longer for the unit to read the
USB device.
● The maximum USB memory size is 128GB.
● USB memory device must be formatted in FAT, FAT16 or FAT32
■ SLEEP/ALARM operation
● SLEEP setting: once turn on the unit, press the SLEEP/ALARM button from remote controller
to start the sleep time setting,
Press the SLEEP/ALARM buttons on remote control to choose 10-90 mins entry to standby
mode.
● Alarm setting: the unit includes simply alarm function, which can play the music
automatically at set up time, or wake up you.
Long press (2seconds) the SLEEP/ ALARM button from remote controller, the hour digits
will flare on display, press previous or next button to adjust the hours, short press the
SLEEP/ALARM button to confirm and skip to minute/alarm source/alarm volume setting which is
same operation as hours setting, press the SLEEP/ALARM button again to confirm and quite the
alarm setting.
a. The sleep and alarm only workable when the AC power is connected. Please set up the
sleep and alarm again in case of power interrupted.
b. When we set up the alarm ready in standby mode, the " Alarm" symbol will show on
display, short press the alarm button can turn on or off the alarm.
c. press previous or next button to select the alarm source between RADIO/USB/CD/
BUZZER , please make sure the disc or USB device is available when you select it as alarm
source.
d. You can select the alarm volume between 6~32.
Troubleshooting
Many potential problems can be resolved by the owner without calling a service technician. If
something is wrong with this product, check the following before calling your authorised dealer or
service centre.
Problem Description
The unit is not powered
on
Cause
• Power cable not connected to wall
socket
• Power socket is not switched on
Solution
• Make sure the plug is connected
• Switch the power on