Publicité
Les langues disponibles
Les langues disponibles
6
Slide the left mounting plate flange under the motor
mounting bracket.
B
A
7
Run the power supply wires and connector from the
range hood terminal box and connect it to the motor
electrical plug.
A
A. Motor Electrical Plug
B. Power supply wires and connector
8
Push the right end of the motor mounting plate up and
snap it into the spring tab.
NOTE: The spring tab should be outside the slot in the
mounting plate.
A
B
9
Align mounting holes and install 6 x 16 mm screws and
6.4mm lock washers
B
A. Screw with lock washer
B. Mounting hole
4
A. Motor mounting bracket
B. Mounting plate left flange
B
A. Motor mounting plate
B. Spring clip
A
10 Attach power supply connector from the range hood to
the connector on the blower motor assembly wiring box.
A
B
A. Blower motor power supply connector
B. Range Hood power supply connector
Publicité
