Publicité
Les langues disponibles
Les langues disponibles
CLEANING
Removing the oven door
Keep your fingers away from the hinges of the oven door. The hinges are spring
loaded and can cause injury if they spring back. Make sure that the hinge latches
are applied correctly to lock the hinges.
1.
First, fully open the door (as far as it will go).
2.
Rotate the stoppers back by 90°.
3.
Slowly close the door until the stoppers are aligned with the hinge beds.
4.
At the angle of 30° (relative to the closed door position), slightly lift the door and pull it out
from both hinge beds on the appliance.
5.
The oven door glass may be cleaned from the inside, but you will have to remove the glass
from the door.
6.
To replace the door repeat these actions in reverse. If the door does not open or close
properly, make sure the hinges are positioned correctly in their slots.
EN 15
Publicité
