FEATURES
• 30 W rated power
• Low impedance, 70 V and 100 V line
• 3.75, 7.5, 15 and 30 W power taps
• IP66 weatherproof
• Built in mounting bracket
INSTALLATION
DANGER: Overhead mounting requires extensive experience, including the calculation of the load limit values of the
installation material and regular safety inspection of all installation materials and devices. If you do not have these qua-
lifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional. There is a risk that
devices that are incorrectly mounted and secured may come loose and fall down. This can cause serious injury or death.
Before installation, make sure that the amplifier system to which the speaker is to be connected is switched off and
that the connection cables are de-energised!
1
Mount the speaker in a suitable position on a sufficiently stable surface.
Outdoor installation: Make sure that water cannot accumulate in the horn.
2
Connect the 2-conductor cable of the loudspeaker to the signal supply. Select the desired transformer tap using the switch.
CAUTION! Do not operate in position 6 (8 Ω) on a 70 V / 100 V system! Damage will be caused!
6