LD Systems CE H30 Manuel D'utilisation page 5

ATTENTION:
1. Do not install or operate the device near any radiators, storage heaters, stoves or other heat sources. Ensure that
the device is always installed in such a way that it is sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as lighted candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the device.
6. Observe the IP protection class as well as the ambient conditions such as temperature and humidity according to
the specification.
7. Devices can be continuously further developed. In the event of any discrepancies between the operating instruc-
tions and the device labelling with regard to operating conditions, performance or other device characteristics, the
information on the device always takes precedence.
8. The device is not suitable for tropical climates and for operation above 2000 m above sea level.
CAUTION:
Connecting signal cables can cause significant interference noise. Make sure that devices connected to the output are
muted while making connections. Otherwise, noise levels may cause damage.
CAUTION: HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use.
The commercial operation of this device is subject to the applicable national regulations and guidelines for accident
prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may generate high sound pressure
levels (SPL) that may cause hearing damage. Avoid exposure to high volumes.
INSTRUCTIONS FOR OUTDOOR INSTALLATION EQUIPMENT
1. Devices for installation applications are designed for continuous operation.
2. Devices for outdoor installation is largely weather-resistant. Depending on the design, however, installed seals may
be made of materials that deteriorate over time. These must be checked regularly and replaced if necessary.
3. The condition of the housing parts and connections must be checked regularly.
4. Surfaces and plastic parts can also weather in installation equipment, e.g. due to UV irradiation. This generally does
not impair functionality.
5. Damage to the surface coating can impair the device's corrosion protection. Damaged surface coating (e.g.
scratches) must be promptly repaired using suitable methods.
6. Fasteners can become impaired in their freedom of movement (e.g. due to oxidation or impurities). Appropriate
measures for loosening are to be applied if necessary.
7. Unless explicitly stated otherwise on the device or in the technical data, the devices are intended for installation
heights of less than 5 m.
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
The packaging includes:
• 1 x CE H30 horn loudspeaker with mounting bracket
• User manual
INTRODUCTION
Combining high sound output with durable construction the CE H30 horn loudspeaker delivers intelligible speech over long dis-
tances. Made of ABS, it is fully IP66 weatherproofed with high impact resistance for the most demanding outdoor environments.
It's fitted with a 180-degree swivel U-bracket for easy mounting. With a power rating of 30 W and a frequency response of
420 Hz – 6 kHz, it projects sound with ease.
5