Publicité
Les langues disponibles
Les langues disponibles
O FFS E T
is the data which is used to align the temperature shown on the display with the actual internal
temperature. Adjustment for each offset can vary from -8 / +8.
After a few hours of refrigeration system operation, insert a digital thermometer (not included)
inside the compartment in the position where you wish to have a more precise temperature and
check that the temperature indicated on the display coincides with the temperature read on the
digital thermometer. If it does not coincide, change the Offset related to the temperature you
wish to reach inside the compartment until the temperature read on the display coincides with
the temperature indicated on the digital thermometer.
O FF SE T
R E PLE N I S H M E NT
Do not place hot food in the refrigerator. Arrange the products so that they do not knock or
damage each other whilst the vehicle is moving. When in use, ensure that the cover is always
correctly closed and only open where necessary. When not in use, keep the cover open to
ventilate the inside.
D E FRO S TI N G
When the ice layer is greater than 4 mm thick, the refrigerator must be defrosted. Switch off the
refrigerator whilst doing this. Do not use sharp objects to remove layers of frost or ice. Wait until
everything has completely melted, dry the refrigerator and only switch it back on upon finishing
the aforementioned operation.
LOW VO LTAG E PROTEC TI O N
In order to prevent excessive battery depletion, a protection device shuts off the compressor in
case of insufficient voltage and turns it back on when the voltage in the system increases after
the batteries have been charged.
BAT TE RY
DIGI TAL
L EVEL
DIS PLAY
Low
Medium
High
TEMP ERATURE IN TERVA L
1
T ≥ -6°C
2
-12°C ≤ T ≤ -7°C
3
T ≤ -13°C
BAT T ERY PROTECT ION
12VD C
Cut-Out
Cut-In
Comp. off
Comp. on
9.6
10.6
11.1
12.1
11.8
12.8
2 4V DC
Cut-Out
Comp. off
21.3
22.7
22.3
23.7
24.3
25.7
21
Cut-In
Comp. on
Publicité
