Publicité
Les langues disponibles
Les langues disponibles
Use the Remote Controller │ 13
Forward button
Reverse button
Speed select
button
Insert the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT: Batteries not included. Refer to the Battery Information.
1. Build connection
Press the Connection button for 2 seconds, the status indicator flashes, then
turn on the power switch located on the the vehicle dash, when the status
indicator turns off about 2 seconds and turns into long bright, means the
connection successful. If the status indicator makes no response, means the
connection failed. Replace the batteries and try again.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed. HINT:
This switch won't work while your vehicle moves reverse.
NOTE:
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
16
Connection button
Brake button
Right button
Left button
High speed indicator
Normal speed indicator
Low speed indicator
Charging │ 14
WARNING!
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
WARNING!
This product with Charging Protection: when charging, all functions will
be cut off! Only an adult can charge and recharge the battery!
• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not
recharge the battery for more than 10 hours to avoid overheating the
charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours,
less than 20 hours at most.
• Use the only rechargeable battery and charger supplied with your vehicle.
NEVER substitute the battery or the charger with another brand. Using
another battery or charger may cause a fire or explosion.
• Do not use the battery or charger for any other product.
How to charge the battery
1. Open the charging cover (below the seat). Plug the charger port into the
charger socket.
2. Plug the charger plug into a wall outlet. The battery will begin charging.
17
Publicité
