Oase Aquarius Eco Expert 7300 Notice D'emploi page 4

- English -
PRODUCT DESCRIPTION
Part
A Pump casing
B Outlet (pressure socket)
C Inlet (suction socket)
D Filter housing
Stand
E − Ensures secure and stable positioning of the pump.
− Can be firmly bolted to the ground.
F Switch for switching on/switching off the Dynamic Function
EGC connection - Connection for Eco Control or for integration into an EGC-network (optional).
EGC
Important: Moisture at the connections can damage the pump.
IN/
− Only remove the protection caps for connecting the Connection Cable EGC lines or terminal resistor.
OUT
− Ensure that the rubber seals are clean and fit exactly.
− Replace damaged rubber seals.
Easy Garden Control System (EGC)
This product can communicate with the Easy Garden Control-System (EGC). EGC allows convenient control in the garden
and pond via smartphone or tablet, and ensures maximum convenience and reliability. Information about EGC and the
possibilities it offers can be found at www.oase-livingwater.com
Dynamic Function
Different values for the pump flow rates are pre-programmed in the pump control system to allow a dynamic fountain
pattern with changing heights and diameters. When the Dynamic Function is activated, the pump is continuously con-
trolled with these values.
D. C. B. A.
E.
Description
F.
4