Silverline Evora Noir Instructions De Montage page 24

WALL EXIT
12 WALL EXIT
Vent through wall
Fig. 16: Loosen the motor's screws
Fig. 17: Rotate the motor.
24
The motor in the hood can be rotated 90 degrees, so that the vent
can be run out between the walls, follow below:
1. Loosen the motor's screws ().
2. Press or tap carefully on the precut back plate to knock it out.
(/1).
3. Rotate the motor and set it in the open hole behind.
ð Now screw the 4 screws to permanently mount the motor.
4. Use the tapped plate to close the hole at the top, with the
accompanying 2 screws (/2).
Contact us for questions ().
HOOD USER GUIDE ENGLISH 06.04.2023