Silverline Evora Noir Instructions De Montage page 21

1
2
1
2
Fig. 13:
Device Preparation
06.04.2023
1. Draw a mid location line from the ceiling perpendicular to the
lower edge of the hood (Fig. 12).
2. There is a tab in the middle of the flue connection plate.
Place the middle point of this tab on the line that is drawn
perpendicular to the wall. Align horizontally and mark the
holes where the connection plate will be mounted via a pen
(Fig. 12/a).
Drill the marked points with Ø6mm drill and insert 2xØ6mm
plastic dowels in the drilled holes (Fig. 12/a).
Fix the flue connection plate to the wall with 3,9x22 screws
(Fig. 12/a).
3. To drill the suspension holes of the flue, place the mounting
template on the surface where the appliance will be mounted
on and mark the mounting holes (Fig. 12/b).
4. Drill the suspension holes with Ø8mm drill and place the
dowels (Fig. 12/b).
Place 2x4.950 suspension screw with a clearance of 5 mm
between the screw head and the wall (Fig. 12/b).
1- M5x8 CPH Screw
2- Hanger Plate
Attach the two hanger plates included in the package to the body
with M5x8 screws (Fig. 13).
n Open the filter cover.
Open the metal oil filter.
n
n If the air discharge pipe diameter is smaller than 150 mm,
install the Ø150/120 mm flue adapter.
HOOD USER GUIDE ENGLISH
Installation
21