Kichler 52 RENEW DESIGNER Manuel D'instructions page 17

INSTALLING THE TRANSMITTER
WALL BRACKET
1. Choose a location for the Transmitter Wall Pocket. Any location
within 30 feet from the ceiling fan remote control receiver is
required.
Choose a flat location, using the wall pocket as a guide, mark the wall
anchor locations.
2. Install the plastic wall anchors and attach the wall pocket.
Your transmitter slips into the wall pocket and may be used from this
location or removed and used as a Hand Held mobile transmitter.
Screws
MED LOW
HI OFF
52" Renew Designer |
17