Kichler 52 RENEW DESIGNER Manuel D'instructions page 15

INSTALLING THE GLASS SHADE
Step 1. Raise the glass shade against the light kit and turn clockwise
until snug, DO NOT OVERTIGHTEN. (Fig. 17)
INSTALLING THE BATTERY
Install a 9 volt battery included with the Hand Held Transmitter.
(Fig. 18)
NOTE: To prevent damage to the transmitter, remove these
batteries if not used for long periods of time (months).
Light kit
Glass shade
Fig. 17
Battery
Battery cover
Fig. 18
52" Renew Designer |
15