Makita UB401MP Instructions D'emploi page 6

Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
This attachment is designed for only the purpose of
blowing dust in conjunction with an approved power
unit. Never use the attachment for other purposes.
Abusing the attachment may cause serious injury.
EU Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB401MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufac-
tured in accordance with the following Harmonised
Standards: EN 15503:2009+A1:2013+A2:2015, EN
50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium.
28. 6. 2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB401MP.
Fulfills all the relevant provisions of S.I. 2008/1597
(as amended) and also fulfills all the relevant
provisions of the following UK Regulations: S.I.
2001/1701 (as amended) and are manufactured
in accordance with the following Designated
Standards: EN 15503:2009+A1:2013+A2:2015, EN
50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium.
28. 6. 2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
Tongwell, Milton Keynes, Buckinghamshire, MK15
8JD, UK
SAFETY WARNINGS
Blower Safety Instructions
WARNING:
instructions, illustrations and specifications pro-
vided with this machine as well as the instruction
manual of the power unit before using. Failure to
follow all instructions listed below may result in elec-
tric shock, fire, and/or serious injury to the operator
and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "blower" and "machine" in the warnings and
precautions refer to the combination of the attachment
and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
Training
Read the instructions carefully. Be familiar
1.
with the controls and the correct use of the
blower.
Never allow children, persons with reduced
2.
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
blower. Local regulations may restrict the age
of the operator.
3. Never operate the blower while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
Preparation
1. Always wear substantial footwear and long
trousers while operating the blower.
2. Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long hair
away from the air inlets.
3. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
6 ENGLISH
Read all safety warnings,