Publicité
Les langues disponibles
Les langues disponibles
2 | Power Supply Cord—Prepare hole
cabinet
cabinet
Wood
cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797)
included with power supply cord kit.
Option B, Direct Wire:
Helpful Tip: Wiring the dishwasher will be easier if you route the
cable into the cabinet opening from the right-hand side.
Direct Wire — Drill hole
Optional location
SA
SSG
.
Preferréd location
Drill a %4" (1.9 cm) hole in right-hand cabinet side or rear.
See product and cabinet opening dimensions.
cabinet
Wood
cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797
not included)
3
Direct Wire—Route cable
Route cable from power supply through cabinet hole (cable must
extend to the right front side of cabinet opening).
Tape cable to the floor in area shown. This will keep cable from
moving when dishwasher is moved
into cabinet opening.
Prepare and Route Water Line
|
Helpful Tip: Routing the water line through the left side of
cabinet opening will make water connection easier.
Drill hole
|
Preferred locations
Measure overall length of copper tubing or flexible braided
water supply line. Attach to the hot water line using a
connection configuration that is in compliance with local codes
and ordinances. The water line to the dishwasher should have a
manual shutoff valve.
7
Publicité
