Amana ADB1600AWW3 Instructions D'installation page 6

INSTALLATION INSTRUCTIONS
Prepare Cabinet Opening—Existing
Check water and electrical
wy placement
@ J ° cS
we Water line —— /
Electrical Shock Hazard Sx
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
| 1 | Disconnect power )
pol If the water line and the cable extend to the locations shown,
Disconnect electrical power. at the fuse box or circuit proceed to the "Install Drain Hose" section. If they do not reach far
breaker.box before installing dishwasher. enough, follow the instructions in the "Prepare Cabinet Opening—
a New Utilities" section.
9 | Shut off water supply so
Shut off the water supply to the dishwasher.
J Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
~-Power Supply. Cord:
~-Follow Option A instructions
Do you already have utility
hookups?
Yes—ollow instructions in the "Prepare Cabinet
Opening—Existing Utilities".section:
No—Follow instructions in the "Prepare Cabinet
Opening—New Utilities" section:
T
S Existing utility hookups No existing utility hookups
|
Water line
~-Direct Wire:
Follow-Option B:instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
Power Supply Cord-Drill hole
Optional location
oN
SS
oH
Preferred location
Drill a 1%" (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.