Publicité
Les langues disponibles
Les langues disponibles
Ye
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Direct Wire—Connect
ground wire
connector
Form bare ground wire into a U-shaped hook. Wrap ground wire
hook clockwise around ground connector screw and under the
washer. Securely tighten ground connector.
3 | Direct Wire—Connect
remaining wires
NOTE:
Do not pre-twist stranded wire. Twist on UL Listed/CSA
Approved wire connector. Gently tug on wires to be sure both
are secured.
Connect wires black to black and white to white, using UL
Listed/CSA Approved twist-on wire connectors (not included).
Wiring configuration
Power. supply wire:
Terminal -box wire:
white <—-
white
black <«—_—-. black
ground. wire -_——» ground connector
If needed, see website for animated representation
of this step. Visit www.whirlpool.com/electrical
under FAO
tab.
4 | Direct Wire—Secure cable
in conduit connector
Direct Wire—Reinstall
terminal box cover
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 4" nut driver and previously
removed screw to secure cover.
17
Publicité
