Suntec Wellness KLIMATRONIC Freeze 7.000 Eco R290 Mode D'emploi page 15

1 Handle
2 Control panel
3 Air outlet
4 Castor
5 Upper air filter grille
6 Exhaust hose opening
Exhaust hose installation
•
Place the unit on a flat surface near a power socket, but at least 50cm away to other objects (see pic.1)
•
Connect the exhaust hose adapters with one end each of the exhaust hose by turning. Then, fix the
exhaust hose at the back of the portable local air conditioner (see pic.2).
•
Temporary exhaust hose installation: Please lead the free end of the exhaust hose out of the window
(see pic.3).
•
Exhaust hose installation with window kit: Depending on your type of window, insert the window kit
horizontally or vertically into your window. Lead the exhaust hose through the hole at the window kit
(see pic.4).
•
Make sure that the outlet is not blocked to prevent damage to the unit.
•
The exhaust hose should not be bent.
Pic.1
Control panel
1 Power
2 Mode
3 Sleep mode
4 Temperature -
5 Temperature +
6 Timer
7 Fan
8 Remote control receiver
9 Water tank indicator
10 Compressor indicator
1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
Pic.2
11 Indicator for high fan speed
12 Indicator for low fan speed
13 Timer indicator
14 Display
15 Sleep mode indicator
16 Cooling mode indicator
17 Dehumidifying mode indicator
18 Fan mode indicator
19 Power indicator
7 Power cord mount
8 Lower filter grille
9 Rubber stopper
10 Rubber stopper cover
11 Power cord
Pic.3 Pic.4