GYS FLASH 9.24 Mode D'emploi page 9

TROUBLESHOOTING
Symptoms
1
Indicator blinks.
2
Indicator is on.
Indicator stays on even after pressing
3
the button.
4
Indicator blinks.
5
Indicator stays on.
GYSFLASH 9.24
Causes
• Polarity reversal
• Battery voltage is too high
• Clamps in short-circuit
Charge failure, battery non recoverable.
Thermal protection.
Charger in sleep mode.
Charge interrupted by pressing
button.
Solutions
• Check that the clamps are properly connected.
• Check that the selected voltage matches the
battery voltage (6, 12 or 24V).
Change the battery and press
charge.
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
Press button or connect a battery to the char-
ger to exit sleep mode.
Press again to restart the charge.
EN
to restart a
9