StarLab Tube Roller Mode D'emploi page 5

5 Operation
5.1 Control elements
Power light
Speed control knob
5.2 Operating
Switch on the instrument with the power switch. Turn the speed control knob to set the rated
speed. Tubes can now be placed on the rolls. Switch off the instrument with the power switch
and turn the speed control knob to "0".
6 Maintenance and cleaning
• Proper maintenance and cleaning will keep the instrument in good working order and
will lengthen its life time.
• Be careful not to spray cleaning fluid into the instrument. Unplug the power cord when
cleaning.
• Please use only Isopropyl alcohol and water containing tenside. Before using other
methods or cleaning agents the user must ascertain with the manufacturer that this
will not destroy the instrument.
• Wear protective gloves during cleaning of the instrument.
• When not in use for long periods, switch off the instrument and store it in a dry, clean and
stable place at room temperature.
Power switch
Tube Roller · Manual · 5