Wipod - Artsound ART 4.1 Mode D'emploi

Infra Red:
Choose 'Infrared' in the Home menu if you want to operate external devices via infrared (for example a
TV). The screen below will appear.
1 Select the device you want to operate from the list (e.g. TV).
2 The screen below will appear:
3 This screen matches the 6 operating buttons of the Wipod. The Home and the Back
buttons are not available for operation of other IR devices. You need these buttons to
go back to the start screen (Home button) or to a previous screen (Back button). You
can train in practically all IR codes of other IR devices. Sometimes, an IR device has a
very specific IR code. That cannot be trained in. That has nothing to do with your

Wipod.

Training a function in:
Before training in an IR function, you need the original remote control of the device you want to
operate. As an example, we will take a TV remote control and train the Power button into the Wipod.
1 Switch the Wipod on, choose 'Infra Red' in the 'Home' menu and press OK.
2 Now choose the device for which you want to train in an IR code (in this example TV).
3 Place the Wipod and the original remote control opposite one another.
4 Now press (on the original remote control) 1x on the button the Wipod needs to learn
(in this example 'Power').
Green = selected
49