Artsound ART 4.1 Mode D'emploi page 47

USB:
After you've connected the Wipod to your laptop or computer (using the USB cable supplied), choose
USB in the Home menu and press 'OK'. The computer will recognise the device automatically and you
can now exchange files with the computer.
Disconnecting your Wipod from the computer:
To avoid loss of data, choose 'Safely remove hardware' in the taskbar of your PC (desktop;
bottom right). Choose the right device and click on Stop. You can now safely disconnect the
Wipod from your PC.
The Flash memory of the Wipod is formatted based on the FAT32 format. You do not need to format it
again.
Formatting anyway:
If you want to format the Wipod anyway, that is possible. Only the data files that were copied
to the Wipod will be lost. Firmware will NOT be removed. After formatting you can use the
Wipod again as usual. You need only to upload new music files (MP3).
With the USB connection on the Wipod you can:
• Exchange music files with a laptop or computer.
• Update firmware.
• Charge the battery.
47