Artsound ART 4.1 Mode D'emploi page 44

External Bluetooth connection:
Choose 'Bluetooth' in the Home screen and press OK. The screen below will appear:
With this function you can also couple other Bluetooth devices (iPhone, SmartPhone or other devices
with Bluetooth functionality) to the Wipod. The maximum distance between the external device and the
Wipod may be 5 metres.
Explanation of buttons:
1 Play control
Press OK to play or stop a music file (on the external Bluetooth device). Press left or
right to select the previous or next number from the external Bluetooth device. This
function will only work if it is supported by the external Bluetooth device (AVRCP).
2 Volume
1 - 80dB. Press OK to read off the volume. Press left or right to increase or lower the
volume.
3 Connect
Use this to couple an external Bluetooth device.
4 Amp Status
Check the status of the Bluetooth receiver.
5 Partnership (authorise)
Press this button to start the association process. The Wipod (and receiver-box) will
be in the association status for maximum 180 seconds. During those 180 seconds you
can couple an external Bluetooth device to the Wipod.
1
2
3
4
5
First activate the Bluetooth functionality of the external device before starting
to couple.
Allow your external Bluetooth device to search for other Bluetooth devices.
The name that appears in the screen of your external Bluetooth device is
"JBM-150" or "Wipod". The search will stop.
Choose the Wipod. A new menu will appear on your external Bluetooth device.
Select the right options.
Your external Bluetooth device will then ask for a code. Type the code "0000".
Once you've confirmed, your external Bluetooth device will be coupled to the
ArtSound Wipod.
Select a music file on your external Bluetooth device and press on Play.
44