4- Installation - Metrolab MFC2046 Manuel D'installation Et De Sécurité

MFC2046 Installation and Safety Manual
BASICS

4- Installation

Review the warnings in Sections 2-2 and 2-3-1.
Make sure you have performed the MFCToolV10 software installation before
powering on the PT2026 main unit.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
The safety of any system incorporating the equipment is the responsibility of
the assembler of the system.
• Install the MFCTool v10 software, as described in the MFCToolV10 User's
Manual.
• Plug the 3026 and power cables, as well as the USB cable and/or an
Ethernet cable, into the PT2026 back panel:
For details on the back panel, please see Section 2-3-1.
v 1.0 r 1.2 – 12/2018 Copyright © 2018 Metrolab Technology SA
CAUTION
!
11 www.metrolab.com