Metrolab MFC2046 Manuel D'installation Et De Sécurité page 9

MFC2046 Installation and Safety Manual v 1.0 r 1.2 – 12/2018 Copyright © 2018 Metrolab Technology SA
CAUTION
!
Always use a three-prong IEC detachable power cord that is grounded,
rated for 250 V – 10 A, and with adequate temperature ratings. The cord
should satisfy IEC 60245-1 for rubber insulated cables or IEC 60227-1 for
PVC insulated cables, as well as all applicable standards and legislation for
your region.
To avoid electric shock, the power cord protective grounding conductor
must be connected to ground.
The disconnecting device is the power plug. Ensure that it can be reached
in case of emergency.
For continued fire protection, use only the specified fuse – see above.
The PT2026 Main Unit and the FCA7046 Amplifier Box contain
ferromagnetic components and may be subject to violent forces in a strong
magnetic field gradient.
The MFC2046 system is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
6 www.metrolab.com