Rb8045 Usb Remote Control Adapter - Metrolab MFC2046 Manuel D'installation Et De Sécurité

MFC2046 Installation and Safety Manual
2-3-1

RB8045 USB Remote Control Adapter

1 MFC Remote
Control
2 USB
To avoid potentially dangerous equipment failures, only Metrolab
peripherals, designed for the purpose, should be connected to the Probe
connector.
To avoid electric shock, only limited-energy circuits (in the sense of EN
61010-1) that conform to the Safety Extra Low Voltage standard (IEC
60364-4-41) should be connected to the Trigger, Clock and Auxiliary
connectors.
Treat the 3026 extension cable with care. They have very tight tolerances,
and crushing them, or even dropping them on the floor, may deform the
shell, making it difficult or impossible to plug in.
When plugging in the 3026 extension cable from the PT2026 to the
FCA7046, make sure the connector is perfectly aligned with the socket;
otherwise it will jam.
To unplug the male plug of the 3026 extension cable from the PT2026 Main
unit, you must grasp the connector sleeve and pull straight back to release
the locking mechanism. Never pull on the cable.
To unplug the female plug of the 3026 extension cable from the FCA7046
amplifier box, press the ring at the base of the socket to release the locking
mechanism.
v 1.0 r 1.2 – 12/2018
2
Connector to plug MFC3045-RB or RB8045 remote
control.
USB 2.0
CAUTION
!
9
Copyright © 2018 Metrolab Technology SA
1
www.metrolab.com