4- Installation - Metrolab PT2026 Manuel D'installation Et De Sécurité

PT2026 Installation and Safety Manual
BASICS

4- Installation

 Review the warnings in Sections 2-2 and 2-3.
 Make sure you have performed the software installation before powering on
the PT2026.
 If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
 The safety of any system incorporating the equipment is the responsibility of
the assembler of the system.
 Plug the probe and power cables, as well as the USB cable and/or an
Ethernet cable, into the back panel:
For details on the back panel, please see Section 2-3.
 If you have a MUX6026 multiplexer, connect it to the PT2026's Probe
socket using the MUX cable, and connect the probes to the multiplexer
v 1.0 r 4.0 – 02/2017
Copyright © 2017 Metrolab Technology SA
CAUTION
!
9 www.metrolab.com