Fulgor Milano FCO 9013 TM Instructions Pour L'installation Et L'utilisation page 38

3 - Installation of the Oven
EN
To install the oven into the kitchen a cutout should be made in
accordance with the dimensions shown in the Cutout & Dimensions
figure.
The apparatus is to be fastened to the top by means of the two screws
provided in the kit through the holes made on the oven uprights.
The cabinet in which the apparatus is installed shall be open on the
back side to ensure a sufficient air circulation and prevent overheating.
WARNING
As the apparatus is to be fitted in your kitchen furniture, make sure
that all surfaces in contact with the oven can resist a temperature of
approx 90°C.
Electricals
Maximum absorbed power: (see data plate).
Supply voltage:
4
(see data plate).
Respect for the environment
The documentation for this appliance is printed on paper bleached
without chlorine or recycled paper to contribute to protecting the
environment. The packaging was designed to prevent damage to the
environment; they are ecological products that can be recovered or
recycled.
Recycling the packing saves raw materials and reduces the volume of
industrial and domestic waste.
THE PACKING MATERIAL is 100% recyclable and marked with the
recycling symbol. Dispose of in conformity with local law. The packing
material (plastic bags, polystyrene parts, etc.) must be kept out of the
reach of children because it is potentially dangerous. THIS APPLIANCE
is marked in conformity with European Directive 2012/96/UE, Waste
Electrical and Electronic Equipment (WEEE). By making sure that this
product is disposed of correctly, the user contributes to preventing
potential negative consequences for the environment and health.
THE SYMBOL on the product or accompanying documentation
indicates that this product must not be treated as domestic waste but
must be delivered to a suitable collection point for the recycling of
electrical and electronic equipment.