Fulgor Milano FCO 9013 TM Instructions Pour L'installation Et L'utilisation page 36

1 - Safety Instructions
EN
IMPORTANT
The oven's data plate is accessible even with the oven
fully installed. The plate is visible simply by opening the
door. Always quote the details from it to identify the
appliance when ordering spare parts.
• Do not disassemble any parts prior to having
disconnected the oven from the mains.
• Do not use the appliance if any part is broken
(for example a glass). Disconnect it from the mains
and call service.
• Before using the oven, it is recommended to make it
operate at noload at the maximum temperature for an hour
to eliminate the insulating material odour.
• In all models, leave the door closed when the grill is
used.
• The cooling fan may remain in operation so long as
the oven is hot, even after it has been switched off.
• During the use the appliance becomes very
hot; don't touch the heating elements inside the oven.
• Parents and adults should pay particular attention
when using the product in presence of children.
2
• Children should be overseen so as to ensure that they
don't play with the equipment.
• Keep children under age 8 away, unless
constantly supervised.
• This appliance is not intended for use by persons
(including children over age 8) with reduced physical
sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsable for their safety.
• Children may not perform cleaning and
maintenance unsupervised.
• In order to avoid damage to the oven enamel
coat, do not cover the oven muffle sole with any item (e.g.
aluminum foil, pans and the likes).
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can scratch
the surface, which may result in shattering of the glass.
• Abrasive detergents and steam cleaning equipment
should not be used for cleaning.
• The appliance must not be installedbehind a
decorative door in order to avoid overheating.
• WARNING: Ensure that the appliance is
switched off before replacing the lamp to avoid the
possibility of electric shock.
• The oven is cool and power to the oven has been
turned off before removing the door. Failure to do so could
result in electrical shock or burns.
• Use only the meat probe supplied with the appliance.
IMPORTANT
If the oven is installed in an ambient temperature below 37
°F (3 °C), F*0117 may appear; when a higher ambient
temperature is reached, the error will no longer appear.