The MAX! Radiator Thermostat can be reset to the ini-
tial state manually. Restoring the initial state deletes all
settings and information about taught-in devices.
First remove the batteries from the actuator.
•
Wait 60 seconds.
•
Press and hold down the three buttons (Auto/Manu,
•
Boost,
Re-insert the batteries.
•
Once the factor y settings have been restored
•
successfully, "rES" is displayed.
9. Operating modes (Auto/Manu/
To switch bet we en ope rating mode s, pres s and
immediately release the Auto/Manu button (the operating
modes only become available for selection once installa-
tion is complete).
Manu
: Manual operation - the temperature set manually
•
using the handwheel is maintained permanently.
Auto
•
: Weekly program - automatic temperature
regulation in accordance with the time profile saved
(heat/reduce).
Holiday (
•
maintained up to an end time, at which point the device
switches to automatic mode. Can only be deactivated
on the radiator thermostat; activation is via a gateway
(e.g. MAX! Cube).
If the operating mode is changed on one device
in a room, this change is applied on all radiator
thermostats assigned to that room.
8. Teach-out/Reset
).
): In holiday mode, the set temperature is
)
25