eQ-3 MAX! Mode D'emploi page 23

Attach the valve adapter to the valve
•
and turn to secure.
• If you are using an RAV adapter, also
attach the extension supplied to the
valve tappet.
Use the screw and nut supplied for
•
additional fastening of RA and RAV
adapters.
Once the batteries have been inser ted, the motor
reverses; meanwhile, "InS" and the activity symbol (
are displayed. As soon as "InS" is displayed without the
activity symbol (
be mounted. This is followed by an adapter run ("AdA") to
adapt the thermostat to the valve.
Attach the radiator thermostat to the valve.
•
Tighten the union nut.
•
Press the boost button when "InS" is displayed.
•
The actuator performs an adapter run. "AdA" and the
activity symbol (
operation is not possible.
If the adapter run has been initiated prior to mounting or if
an error message (F1, F2, F3) is displayed, press the Boost
button; the motor reverses to the "InS" position.
If the MAX! Radiator Thermostat has not been taught-in
on the MAX! Cube, the device automatically switches to
manual operation (Manu).
Teach-in mode can be activated even whilst "InS"
is still displayed.
), the electronic radiator thermostat can
) are displayed; during this time,
)
23