Candy CTS6ESMX Mode D'emploi page 8

Regularly check the power plug and power cord for damage. If the supply cord is
damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: This is a Class I appliance and MUST be earthed
This appliance is supplied with a 3 core mains cable coloured as
follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
WARNING:
Start Using Your Cooker Hood
Electronic button
There are five buttons:
picture above.
1. After connecting to power, indicator light will lit on, all the output close and the hood
will enter standby mode. The indicator light will be off automatically after reminding
if no operation.
2. Power on: Press power button
at low speed. Indicator light of low speed
again to close it, and its indicator light will be off. All the function operation of the
hood will be closed, the hood enters into standby mode, and run by circle.
The speed buttons and lamp button can work separately and not controlled by the
power button. When a certain function button is pressed, the hood operates at that
function status. Press (Power) button under any status, the cooker hood will be
switched off without any functions.
3. Press lamp button
 For safety reason, please use only the same
size of fixing or mounting screws which are
recommended in this instruction manual.
 Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
(Low), (Mid),
once, its indicator light will lit on, the hood works
once; lights will be turn on. Indicator light of lamp button
8
(High), (Lamp),
will be bright. Press power button
(Power).See