Candy CTS6ESMX Mode D'emploi page 6

3. Install the hook on a suitable place once the installation height is fixed, and keep it
in line. The fixed position of the inside chimney bracket is the place of chimney.
See pic 2.
4. Intall the v-flap on the oulet. Then attach the converter and expansion pipe, and fix
the pipe on the converter with a cable tie, see pic 3. Fix the outside chimney
bracket on the outside chimney, and be sure that the inside chimney can be
adjusted the height in it freely. Afterwards, install the expansion pipe and chimney
on the cooker hood, see pic4. Note: The expansion pipe is not included in the
product.
5. Put the cooker hood on the hook. Then adjusting the position and fix the body with
safety screws. Note: The two safety vents are positioned on the back housing, with
diameter of 6mm. See pic 5 & 6.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix it with screws. See pic 7.
6