Publicité
APP CONNECTION & OPERATION
1.
Open the app. After the initial "Sign Up" process
has been completed, the app opens, by default
to the "Add Device" screen.
2. Make sure that your device and stove connect
to the same Wi-Fi network.
3. Make sure the stove is plugged into an electrical
outlet and can be powered on.
4. There is a red flashing indicator light located
above the configure button. Note: When the
indicator light is flashing the unit is ready to be
paired. When the indicator light is solid the unit
has successfully paired.
WIFI
ON/OFF
(POWER)
5. Select "Add Device". Note: Access to location
and Bluetooth is required while using the app.
6. A screen with "Discovering Devices" will come
up. Press the "Add" button.
7.
Enter the Wi-Fi information.
8. The blue circle indicates the device is in the
process of being added.
9. Once the unit has been successfully added a
green check mark will appear. The app and unit
are now ready for use.
© 2024 United States Stove Company
DISPLAY
HEAT
MODE
RANGE
OPERATION INSTRUCTIONS
Device Select
Screen
Current Room
Temperature
Stove Setting
Decrease
Temperature
Setpoint
Power ON/OFF
18
Device Name &
Device Sharing
Settings
Temperature
Adjuster
Increase
Temperature
Setpoint
Mode
Heat Range
Publicité
