VALBERG 988234 Consignes D'utilisation page 36

C
Cleaning and maintenance
Codes
Ed
WARNING!
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill
or small leak, the water should be removed before
restarting the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
Usage counter
When the power cord is connected, but the dishwasher is not turned on, close the door, press
and hold the Delay button for 5 seconds, the dishwasher display will show the usage count.
for 5 Sec.
Example:
632: Show "000" for two seconds, then show "632" for two seconds, at last it will be off.
9080: Show "009" for two seconds, then show "080" for two seconds, at last it will be off.
Meanings
• Failure of
communication
between main
circuit board with
display circuit
board.
for 632
2 Sec.
35
Possible causes
• Open circuit or break wiring for the
communication.
for 9080
2 Sec.
EN