HQ Power ILBA192 Notice D'emploi page 5

c) Connections
The manufacturer is not responsible for damage caused by improper connections.
Connect the supplied adapter with the DC jack and connect the other end with a mains outlet.
The device has a built-in microphone for sound control. Use the MIDI input if you want sound control by an external
source.
5. Operating Instructions
Programming Scenes
Hold the PROGRAM button for 2 seconds to activate the PROGRAM mode. The PROGRAM LED will flash.
a) Scene Programming
1. Press the desired SCANNER button to select a device
2. It is possible to select several devices and control them simultaneously.
3. Adjust the appropriate faders to the desired output level.
4. Press the MIDI/ADD button
5. Select the desired bank with ▲ or ▼.
6. Press a SCENE button to store this scene in the selected bank.
b) Scene Editing
1. Select the desired scene of a bank by pressing the corresponding SCENE button.
2. Adjust the faders
3. Press the MIDI/ADD button
4. Press SCENE again to store the new settings
c) Copying a Scanner
1. Hold the button for the currently selected scanner
2. Press the button for the scanner you want to copy the settings of the first scanner to.
3. Release both buttons.
d) Copying a Scene
1. Press the SCENE button for the scene you wish to copy
2. Press the MIDI/ADD button.
3. Select a bank with ▲ or ▼ and press the button for the scene you want to copy the settings of the first scene to.
e) Deleting a Scene
1. Select the desired scene by pressing the corresponding scene button.
2. Press the button for the scene to be deleted while holding the AUTO/DEL button.
f) Clearing all scenes
1. Press PROGRAM and ▼ while deactivating the device.
2. Turn the device back on.
VDPC145_v2 5 VELLEMAN