Metabo HPT DH 40MEY2 Instructions De Sécurité Et Mode D'emploi page 7

(3) As you hold the band to make sure the handle bolt
won't come loose, insert the handle bolt into the mount.
(Fig. 5)
Handle bolt
(4) Adjusting the band to a position that is suitable for the
task, turn the side handle to fasten the band. Make sure
that the band is securely fastened. (Fig. 6)
Band
Mount
Fig. 5
Side handle
Fig. 6
7. How to install tool
CAUTION
For tools such as a drill bit and a bull point, use
only metabo HPT genuine parts.
(1) Clean, then smear the tool shank with the grease
provided in the tube.
(2) To attach the tool (SDS max shank), insert it into the
hole until it contacts the innermost end of the hole as
illustrated in Fig. 7.
Turn the tool while gently pressing it in, and the groove
of the tool will catch, allowing the tool to enter more
deeply until it is inserted all the way.
Tool
Tool shank
(3) Pull the tool to make sure it is locked completely.
(4) To remove the tool, fully pull the grip in the direction
of the arrow and pull out the tool (Fig. 8).
Pull the tool out
English
Grip
Fig. 7
Pull the grip back
Fig. 8
7