Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
Before Rotation
Back of
Microwave
□
Place the blower unit back into the opening.
AFTER:Fan Blade
Openings Facing
Top
CAUTION: Do not pull or stretch the blower unit wiring. Make
sure the wires are not pinched, and that they are properly
secured.
□
Secure blower unit to microwave with the screw removed in Step
1. Make sure the screw is tight.
□
Replace blower plate with the screw removed in Step 1. Make
sure the screw is tight.
After Rotation
Back of
Microwave
Back of
Microwave
Back of
Microwave
□
Attach the exhaust adaptor to the top of the blower plate by
sliding it into the guides of the blower plate.
Adaptor
Guide
□
Push in securely until it is in the locking tabs. Take care to assure
that the damper hinge is installed so that the damper swings freely.
C4. CHECK FOR PROPER DAMPER OPERATION
Blower Plate
Exhaust Adaptor
□ Make sure tape securing damper is removed and damper pivots
easily before mounting microwave.
□ You will need to make adjustments to assure proper alignment
with your house exhaust duct after the microwave is installed.
23
Back of
Microwave
Locking Tab
Damper
Microwave
Back of
Publicité
