Attach The Change Indicator - TENA SmartCare Change Indicator Mode D'emploi

ATTACH THE CHANGE INDICATOR

ATTACH THE CHANGE INDICATOR
EN
See list of supported TENA absorbent products on p. 18 in this guide.
NA Slip /
NA Stretch Brief /
NA Brief
ENA Pants/
Flex
ENA Underwear
Find the front
1
TENA Slip /
TENA Stretch Brief /
TENA Brief
Align with the top of the
3
thicker absorbent area
TENA Flex
TENA Pants/
TENA Underwear
NOTE
Always attach the Change Indicator before you unfold the incontinence
product. Start by placing the Change Indicator at the front of the inconti-
nence product, on the thicker absorbent area, ensuring it is straight.
Align the transmitter with the top of the thicker absorbent area of the
incontinence product. Press firmly to ensure the Change Indicator has
full contact with the whole incontinence product.
TENA SmartCare Change Indicator
Keep folded
2
Place tightly
4
14
TM/MC