Set Up The Gateway - TENA SmartCare Change Indicator Mode D'emploi

Placement
10 m/ 33 ft
1
Screws or adhesive strip
3
See page 24
Gateway lights & buttons
Blinking light Steady light
= connecting = connected
must be within 10 m/33 ft
2
You can also place the gateway
on a flat surface
11
No light
TENA SmartCare Change Indicator
= OK

SET UP THE GATEWAY

SET UP THE GATEWAY
NOTE
The Change Indicator
from a gateway to
be monitored by
the system.
Click!
TM/MC
EN