Kozy Heat Fireplaces HTK-INT Mode D'emploi page 5

1.4 Dimensions and Clearances
The Springfield 36 (Model #SFD-36) corner installations
have increased minimum dimensions to allow space for
the SFD-HTK air chute. See appliance installation and oper-
ation manual for more information.
•
Figure 1.3 shows the dimension of the air discharge
box with the boot attached.
•
Figure 1.4 shows the depth of the supplied boot.
•
Figure 1.5 shows the 4" (102mm) clearance between
the air discharge box and the framing of the floor or
the ceiling.
•
Figure 1.6 (on the following page) shows an option
installation method using 3.25" x 10" wall stack with S
cleats attached to the air discharge box. The figure
also shows an angled 3.25" x 10" x 6" angled boot
that may be needed for certain applications. The wall
stack application has to start after achieving the mini-
mum run of insulated flex pipe to boot. The wall stack
is 0" (0mm) clearance to combustibles. The wall stack
and angled boot are not provided.
•
Figure 1.7 (on the following page) shows finishing
clearances.
Figure 1.3, HTK-INT Dimensions
HTK-INT
Figure 1.4, HTK-INT Dimensions — Side View
Figure 1.5, HTK-INT Ceiling and Floor Clearances
5 Rev. 14 — April 2024