Publicité
Les langues disponibles
Les langues disponibles
STEP 6 (ranges only)
Install Anti-Tip Bracket
To reduce the risk of tipping of the range, the range must be
secured to the oor with a properly installed Anti-Tip Bracket
(included).
All ranges can tip and cause injuries. Install anti-tip device
packaged with range, follow all Installation Instructions.
Failure to install the Anti-Tip Bracket will allow the range
to tip over if excessive weight is placed on an open door
or if a child climbs upon it. Serious injury might result from
spilled hot liquids or from the range itself. If range is ever
moved to a different location, the Anti-Tip Bracket must be
re-installed.
STEP 7
Connect to AC
DANGER:
and all local codes and requirements.
label on back of appliance.
regulations in force.
The electrical socket must be easily accessible with the appliance installed. In all cases, the power supply lead must
be positioned so that it does not reach a temperature of 50°C (122°F) above the room temperature at any point.
therefore necessary that all installation and connection operations are carried out by qualified personnel, complying
with the local and general regulations in force.
Installation
Make sure the anti-tip bracket is installed:
Slide range forward.
u
Make sure the anti-tip bracket is securely attached
v
to the wall behind the range.
Safely tilt the front of the range upward slightly and
w
move back against wall, Making sure the pin slides
under bracket.
— 21 —
Figure 15
Publicité
