Safety Instructions For Hammer Drills; Electrical Safety; Before The First Use; Contents Of Packing - Batavia MAXX Série Mode D'emploi

Masquer les pouces Voir aussi pour MAXX Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended
could result in a hazardous situation.
Service
2.5
a. Please use a qualified expert who uses
original replacement parts to repair
your power tool. This will ensure proper
functioning of the power tool.
3. Safety instructions for hammer
drills
• Do not work materials containing
asbestos. Asbestos is considered
carcinogenic.
• Wear safety goggles, hearing protection
and if necessary other protective
means, such as safety gloves, safety
shoes, etc.
• Always hold the machine with two
hands.
• Make sure that the workpiece is prop-
erly supported or fixed.
• Before use, always check walls, floors,
or ceilings for the presence of hidden
wiring and pipes.
• Only use accessories that are suitable
for use with the machine.
• Only use accessories with the correct
dimensions.
• Inspect the accessories before each
use. Do not use accessories which are
bent, cracked, or otherwise damaged.
• Always use the auxiliary grip to reduce
the risk of loss of control. Risk of per-
sonal injury.
• Hold the machine by the insulated grip-
ping surfaces where the accessory may
contact hidden wiring or the mains
cable. If the accessory contacts a 'live'
wire, the exposed metal parts of the
machine can also become 'live'. Risk of
electric shock.
• After use, do not touch the tip of the
accessory.
6
7062733-SDS_Plus_Hammerdrill-Ma-1801-08.indb 6

4. Electrical safety

Always check that the voltage of
the power supply corresponds to
the voltage on the rating plate.
• Do not use the machine if the mains
cable or the mains plug is damaged.
• Only use extension cables that are suit-
able for the power rating of the machine
with a minimum thickness of 1.5 mm
If you use a extension cable reel, always
fully unroll the cable.

5. Before the first use

Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!

6. Contents of packing

1× SDS Plus Rotary Hammer
1× Additional Handle
1× Depth stop
2× Chisels
3× Drill bits
1× Dust collector
1× Spanner
1× Lubricant
1× Case
1× Instruction manual

7. Intended use

Your hammer drill has been designed for
drilling holes into wood, steel, and masonry.
The machine can also be used as a demoli-
tion hammer in combination with the SDS
chisels.

8. Assembly

Before assembly, always switch off
the machine and remove the mains
plug from the mains.
Mounting and removing the accessory
8.1
(fig. A & B)
Do not use blunt drill bits or
chisels. Immediately sharpen or
replace blunt drill bits or chisels.
.
2
16-03-18 12:42

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Maxx bt–pd003

Table des Matières