Publicité
Les langues disponibles
Les langues disponibles
GENERAL RULES
Foreword
NOTE
Carry out maintenance operations at half the intervals specified if the vehicle is used rainy or dust conditions, off road
or for track use.
Motorcycle care
F.B Mondial recommends using quality products to clean the vehicle. The use of unsuitable products can damage vehicle
components. For cleaning do not use solvents such as" nitro thinner " or " cold cleaning agents ", fuels or similar, or cleaning
products that contain alcohol.
Before cleaning
•
Close off the exhaust system to avoid water from entering
•
Make sure that all caps and covers as well as electrical couplers and connectors, including the spark plug(s) are properly
tightly installed.
•
First, remove coarse dirt particles with a gentle spray of water. Spray very dirty areas with a normal motorcycle cleaner and
then clean with a brush.
Washing the motorcycle
F.B Mondial recommends softening with plenty of water and then, carefully remove the insects and more stubborn stains before
washing the vehicle. To prevent stains, do not wash the motorcycle immediately after exposure to sunlight.
Do not wash it in the sun.
If the vehicle is used during the wintertime, be sure to frequently wash the motorcycle. To remove anti-icing salt sprayed on roads
in the winter, wash the motorcycle with chilly water immediately after use.
CAUTION
After cleaning your motorcycle, the efficiency of the braking system may be temporarily affected due to the presence
of water on the friction surfaces. You must consider an increase in braking space, operate the brakes repeatedly to
restore normal conditions. Carry out the pre-ride checks before use.
Use of hot water intensifies the effect of the salt. Use only plenty of chilly water to wash and remove anti-icing salt.
Use of high-pressure washing systems (or steam cleaners) can damage the seals, oil seals, braking system,
electrical system and seat. Do not use steam or high-pressure cleaning systems.
6
Publicité
