Publicité
Les langues disponibles
Les langues disponibles
•
Select the fan speed by pressing the
You can choose:
Minimum speed: for silent operation.
Medium speed: reduces noise levels while main-
taining a comfortable temperature.
Maximum speed: to achieve the target tempera-
ture as rapidly as possible.
the appliance automatically selects the
most suitable fan speed in relation to the temperature set on the
digital display and current room temperature.
The most suitable temperature for the room during the summer
varies from 75°F to 81°F (24 to 27°C). You are recommended,
however, not to set a temperature much below the outdoor tem-
perature.
WHISPER COOL (available in conditioning mode only)
By activating this function, the operating noise is further re-
duced. To activate it, touch the
The display shows the relative symbol (C17).
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc). In dehumidifying mode, the appli-
ance MUST be set-up in the same way as for air conditioning,
with the air exhaust hose (B2) attached to enable the moisture
to be discharged outside. To set this mode:
• Touch repeatedly the MODE button until the dehumidify-
ing symbol is displayed.
FAN MODE
When using the appliance in this mode, the air exhaust hose
(B2) does not need to be connected.
To set this mode:
• Touch repeatedly the MODE button until the fan symbol is
button (C6).
(C7) button.
displayed.
• Select the fan speed by pressing the
You can choose:
Minimum speed: for silent operation.
Medium speed: reduces noise levels but still main-
tains a good level of comfort.
Maximum speed: for maximum fan power.
HEATING MODE
This is ideal in spring and autumn when outdoor temperatures
are not particularly severe. For this mode, the appliance should
be prepared in the same way as for air conditioning, with the
air exhaust hose (B2) attached to enable the moisture to be dis-
charged outside. To set this mode:
• Touch repeatedly the MODE button until the heating sym-
bol is displayed.
•
Press + (C4) or - (C5) buttons to adjust the desired tem-
perature.
Note:
•
In this mode, fan speed is selected automatically by the ap-
pliance and cannot be set manually.
•
When operating in very cold rooms, the appliance defreez-
es automatically, momentarily interrupting normal opera-
tion. " Lt " appears on the display. During this operation, it
is normal for the noise made by the appliance to change.
•
In this mode, you may have to wait a few minutes before
the appliance starts giving out hot air.
•
In this mode, the fan may operate for short periods, even
though the set temperature has already been reached.
•
It may happen that the display shows "HL" alarm. In this
case, empty the internal safety tank following the instruc-
tion in the Section "End of Season operatons". At the end,
press again the
CHANGING TEMPERATURE SCALE
The temperature can be displayed in °F or °C. To change the tem-
perature scale, turn off the unit by pushing the
keep pushed the MODE button for approximately 20 seconds.
The appliance emits a beep to confirm.
9
button (C6).
button to restore the heating function.
button, then
Publicité
